1, 6.6ft (200cm) railx1
2, Spacers×5, used to keep space between the wall and the rail.
3, Roller×2, made of aluminum hanger and nylon wheel with ball bearing makes your door moving stably and in low noise.
4, Door Stops×2, used to adjust and control the rolling distance.
5, Floor Guide×1, to prevent door from shifting, door bottom groove is required.
6.Side Bafflex2, used to cover the guide rail structure on the side, beautify the overall system of sliding door.
7, Hex tools and all hardware fasteners×1.
1.The length of rail should be at least twice of width of door panel.
2.The space between door top and roller top is 2-9/16 inch(65.1mm), Please leave enough space from your ceiling.
3.In case of directly mounting on wall,the final gap between door and wall is about (7/8″ to 1-1/16″) which depends on door thickness.
1.Only the hardware is for sale. Door is not included (We are selling it separately).
2.If there is any missing part or damage, please feel free to contact us and we will resend it at first time.
3.Rail can be cut to any length.
4.Before installation, Measure your door height, door trim(if available) and bottom groove, Leave appropriate gap for your floor guide.
5.This sliding door hardware is only suitable for wooden doors, please do not use it with glass doors.
6.Your advice is welcome at any time.